Question 1: Draw the front view of a simple rectangular box with a smaller rectangular protrusion on the top right corner.

Answer: A rectangular shape representing the front view, with a smaller rectangle on the top right side indicating the protrusion. The drawing should be proportionate and clearly show the main shape and the protrusion.

Question 2: Sketch the top view of a cylindrical container with a handle attached on one side.

Answer: A circular shape representing the top view of the container, with a handle drawn as a smaller semi-circular or rectangular extension on one side. The handle should be clearly attached to the main circle.

Question 3: Draw the right side view of a triangular prism with a rectangular base.

Answer: A triangle with the rectangular base visible at the bottom, showing the sloped sides of the prism. The shape should be consistent with a prism's side view, with parallel edges and accurate proportions.

Question 4: Create a front view of a symmetrical object that is wider at the bottom and tapers towards the top, like a cone with a flat top.

Answer: A shape resembling a truncated cone, with a wider base at the bottom and a narrower top. The lines should be straight and converging, demonstrating symmetry.

Question 5: Sketch a side view of a simple chair with four legs, a seat, and a backrest.

Answer: A rectangular seat with four straight legs underneath, and a vertical backrest extending upwards from the rear of the seat. The sketch should clearly show the proportions and placement of each component.

Question 6: Draw the plan (top view) of a rectangular table with a central circular hole for an umbrella.

Answer: A rectangle representing the table's top, with a smaller circle at the center indicating the hole. The lines should be straight and the circle proportionate to the table size.

Question 7: Describe how to draw the front, top, and side views of a cube with a small rectangular cut-out on one face.

Answer: The front view shows a square with a rectangular cut-out on one side. The top view shows the outline of the cube with the cut-out visible as a smaller shape within. The side view depicts the depth and location of the cut-out, aligned with the front view.

Question 8: Sketch the isometric view of a simple L-shaped block with equal-length arms.

Answer: A three-dimensional representation showing the L-shape with parallel lines and equal arm lengths. The sketch should use isometric projection principles, with the shape appearing to have depth and clarity.

Question 9: Draw a labelled orthographic projection of a basic toolbox showing the front, top, and right side views on the same sheet.

Answer: Three views: the front view should show the toolbox's main outline with handles; the top view shows the lid and the handle's placement; the right side view displays the depth and side details. All views should be aligned correctly.

Question 10: Explain the difference between a plan view and an elevation view in orthographic drawing.

Answer: A plan view is a top-down view showing the layout or footprint of an object, while an elevation view shows the height and vertical features of an object from the front, side, or rear.

Question 11: Identify two features that are important to include when drawing accurate orthographic projections of an object.

Answer: Proportional lines and correct alignment of views; clear indication of hidden lines and features. (Any two relevant features can be accepted).